Products

DESCRIPTION

Basic Info

Model NO.	120-20000KW
Drum Placement	Horizontal Boiler
Pressure	Low Pressure
Manufacturing Level	A
Burning Style	Chamber Combustion Boiler
Usage	Industrial
Product	Thermal Oil Boiler Heater
Boiler Fuel	Natural Gas, City Gas, Diesel, Heavy Oil
Medium	Organic Heat Transfer Material
Thermal Capaicty	30,000 Kcal/Hr to 2,000,000 Kcal/Hr
Highest Work Temperature	320c
Application	Asphalt Plant, Bitumen, Plastic and Rubber Factory
Design Pressure	0.8MPa
Work Pressure	0.6MPa
Thermal Efficiency	85%
Warranty	1 Year
Transport Package	Wooden Package
Specification	120-20000KW
Trademark	Jinzhen Boiler
Origin	Henan, China
HS Code	8404101000
Production Capacity	50 Set/Month

Product Description

Horizontal Organic Heat Carrier Thermal Oil Boiler From China Product Description

Oil Gas Fired Thermal Oil Boiler

Heat Power:300,000-2,000,000 Kcal/H Working Pressure :0.8 MpaFuel :natural gas, diesel, heavy oil, light oil, crude oilApplication : textile printing and dyeing, plastic and rubber, paper industry, wood industry, building material, food industry, etc.YY(Q)W series thermal oil boiler adopts horizontal chamber combustion three-coil structure,and its body is composed of outer coil,middle coil,inner coil and rear coil.

This thermal oil boiler have advanced program control system, equipped with liquid level controller , pressure controller, temperature controller, and alarms to make sure the boiler work orderly and safe. So it is a kind of safe boiler with high efficiency and low power consumption.Working Principle Of Thermic Fluid Heater
This thermic fluid boiler has compact structure. The heating area is constituted by close-knit coil pipes from inside to outside.Inside coil pipes are the radiation heating surface, and the outer surface of inside coil pipes and outside coil pipes form a convection heating surface.Fuel burn fully in the combustion chamber, the radiation heating surface absorb most heat, and then high temperature flue gas goes into convection heating surface to exchange heat, then go into the air preheater (or waste heat boiler) to heat the required (or water).at last, the low temperature flue gas discharges to the aerosphere through the chimney.
Thermal Oil Boiler (Heater) SystemThis thermic fluid heater has advanced program control system, equipped with liquid level controller , pressure controller, temperature controller, and alarms to make sure the boiler work orderly and safe. So it is a kind of safe boiler with high efficiency and low power consumption.

Its advantage is Free-Installation

The complete boiler system is well skid-mounted on the basement, also we have done the pipe(valves) connection and wire connection. After receiving the boiler, user no need to do installation, just filling the thermal fluid oil, join the fuel and electricity. Entire boiler system is portable.

Product Parameters

Item		Oil/Gas Fired Thermal Oil Boiler
Rated thermal power	KW	1200	1500	1800	2900	3500	4700	5900	7000
	×104(Kcal/h)	100	130	150	250	300	400	500	600
Boiler thermal efficiency %		>=92%
Design pressure Mpa		1.1
Max. working temperature ºC		320	320	320	320	320	400	400	400
Medium volume m3		0.8	1.2	2.1	3.5	7.8	8.4	8.8	10.5
Medium circulation flow m3/h		100	100	160	200	200	260	300	340
Main pipe diameter DN		125	125	150	200	200	200	250	250
Fuel type		Diesel, Heavy oil, Natural gas, LPG, Coke oven gas
Boiler size(m)		1.92×4	1.95×4.3	2.4×4.3	2.8×6.3	2.92×6	3.23×6.7	3.26×7.45	3.26×7.9

Technical Advantage

1. High thermal efficiency

The thermal oil boiler is circulation heating in liquid phase, there is no heat loss leaded by condensing, thermal efficiency is high, and the boiler is very safe when operating.

2) The boiler shell use aluminum silicate board for heat preservation, low heat loss.

3) By equipped with economizer, make full use of flue gas heat, decrease the exhaust smoke temperature.

2. Large combustion chamber

The boiler combustion chamber is composed with large diameter coil, enough fuel combustion space, sufficient combustion, high thermal efficiency. Moreover, the boiler adopts positive pressure combustion, improve the combustion efficiency.

3. Excellent coil design

The spiral pipes are made of small diameter multi-head steel tubes, good thermal expansibility, low stress, safe and reliable.

4. Sufficient output

Thermic fluid heater adopts horizontal type three pass structure, improve the heat utilization efficiency. Large heating area, good heat transfer, achieve high thermal efficiency and sufficient output.

5. Multi-function safety explosion-proof equipment

Equipped with explosion proof equipment at the back of boiler, prevent deflagration in furnace, discharge high energy, to ensure the hot oil boiler operate safely and efficiently.

Detailed Photos

Application

Owing to its characteristics of high heating temperature, low working pressure, and energy saving, the oil fired thermal fluid heater could be widely used in a variety of industrial heating process.

1) Textile industry - dyeing machine, drying rooms, high temperature machine, resin setting machine.

2) Food industry - cooking, drying, vegetable oil refining.

3) Chemical industry - oil chemistry, polymer industry, reaction tanks, distillation, concentration.

4) Plastics industry - plastics fired, extruded shape.

5) Rubber industry - hot press, hot extent, extrusion, vulcanization molding, injection, etc.

6) Paper industry - drying, corrugated paper processing, calender, glue roller.

7) Wood industry - hot processing, heat setting.

8) Machinery industry - drying, assembly processing

9) Building materials industry - plasterboard drying, asphalt heating, emulsified asphalt, asphalt concrete, concrete component maintenance, etc.

10)Synthetic fiber industry: polymerization, melting, spinning, extension, dry

FAQ

1.What are the heat-resistance temperature of grate and furnace?

The heat resistance temperature of grate is related to the grate material, the highest temperature could be as high as 1100ºC, and the lower temperature could be 700ºC.The highest heat resistance temperature of furnace could be about 1700ºC~1800ºC.2.What is conduction oil/ hot oil / heat transfer fluid?Conduction oil has a high boiling point, it usually used for the industries that need the temperature of 150~350ºC, to instead of steam. The hot oil has the advantages of high transfer efficiency, fast heat transfer, and good thermal stability.3.What about the delivery?We have shipping agent can choosing the cheapest and fastest delivery. FOB,CIF, C&F or EXW are no problem for us.4.What about the maintenance?I will offer you the timely maintenance way sheet after installation of the boiler mainly parts.
5. What's your main product?Our main product scope:1.Fire tube series Horizontal oil/gas fired boilers (0.5-30T/H, 0.7-21MW)2.Water tube series Horizontal Oil/gas fired boiler (4- 35T/H )3.Vertical fire tube series Vertical Oil/gas fired boiler (0.1-2 T/H, 0.06-0.7MW )4.Large drum chain grate new type water fire tube boilers (1-35T/H, 0.7-29MW)5. Double drum chain grate series water tube biomass boilers (4-35T/H, 1.4-29MW)6. Electric boiler boiler ( 10--50 T/H)7.Oil/Gas fired thermal oil boiler8.Coal fired thermal oil boiler heater