Products

DESCRIPTION

Basic Info

Model NO.	YY(Q)W-1400Y(Q) 1400KW
Function	Oil Boiler
Fuel	Oil-Fired
Installation	Packaged Boiler
Structure	Hot Oil Tube
Media	Organic Heat Transfer Material
Water Circulation	Natural Circulation
Drum Placement	Horizontal Boiler
Pressure	Low Pressure
Manufacturing Level	A
Burning Style	Chamber Combustion Boiler
Usage	Industrial
Product	Thermal Oil Boiler Heater
Boiler Fuel	Natural Gas, City Gas, Diesel, Heavy Oil
Medium	Organic Heat Transfer Material
Thermal Capaicty	30,000 Kcal/Hr to 2,000,000 Kcal/Hr
Highest Work Temperature	320c
Application	Asphalt Plant, Bitumen, Plastic and Rubber Factory
Design Pressure	0.8MPa
Work Pressure	0.6MPa
Thermal Efficiency	85%
Warranty	1 Year
Transport Package	Wooden Package
Specification	120-20000KW
Trademark	Jinzhen Boiler
Origin	Henan, China
HS Code	8404101000
Production Capacity	50 Set/Month

Product Description

Organic Heat Carrier Boilers, Thermal Oil Boiler For Wood Hot Press MachineProduct Description

thermic Fluid Heater, thermal oil boiler, hot oil boilerthermal capacity: 350kw-1400KWWorking pressure:0.8-1.0 MPAOutlet temperature:320 CAvailable fuel:natural gas, coke oven gas, bio-gas,liquefied petroleum gas, diesel, heavy oil, light oil, crude oilAvailable industries:Petroleum, chemical, chemical fiber, pharmaceutical, textile printing and dyeing, building materials, wood processing, vegetable oil processing and other industriesYYW series oil fired thermal oil boiler designed with three passes coiled tubes, the tail heat surface form the wet back type smoke-transfer chamber structure, to improve heat efficiency. large access door design of boiler's front and rear panel,hammer paint coating, which makes the inspection convenient,elegant outside.Working Principle Of Thermic Fluid Heater
Oil-fired thermal oil boilers have a three-pass round coil structure. A conical coil is used for the effective protection of the furnace wall at the boiler end. This product is equipped with an advanced combustion device and is fully automated in operation. After the burner ignites the fuel, flame fills the round coil tubes and transfers heat by radiation through the tube wall (first pass). The high temperature flue gas gathers at the back door and then turns to the convection tubes section (second pass), where heat transfer takes place by convection. The flue gas gradually cools down here and flows to the front door, where it is reversed and goes into the third pass. After that, it enters into the chimney through the economizer and is released into the atmosphere.
Thermal Oil Boiler (Heater) SystemThis thermic fluid heater has advanced program control system, equipped with liquid level controller , pressure controller, temperature controller, and alarms to make sure the boiler work orderly and safe. So it is a kind of safe boiler with high efficiency and low power consumption.

Its advantage is Free-Installation

The complete boiler system is well skid-mounted on the basement, also we have done the pipe(valves) connection and wire connection. After receiving the boiler, user no need to do installation, just filling the thermal fluid oil, join the fuel and electricity. Entire boiler system is portable.

Product Parameters

Item		Oil/Gas Fired Thermal Oil Boiler
Rated thermal power	KW	1200	1500	1800	2900	3500	4700	5900	7000
	×104(Kcal/h)	100	130	150	250	300	400	500	600
Boiler thermal efficiency %		>=92%
Design pressure Mpa		1.1
Max. working temperature ºC		320	320	320	320	320	400	400	400
Medium volume m3		0.8	1.2	2.1	3.5	7.8	8.4	8.8	10.5
Medium circulation flow m3/h		100	100	160	200	200	260	300	340
Main pipe diameter DN		125	125	150	200	200	200	250	250
Fuel type		Diesel, Heavy oil, Natural gas, LPG, Coke oven gas
Boiler size(m)		1.92×4	1.95×4.3	2.4×4.3	2.8×6.3	2.92×6	3.23×6.7	3.26×7.45	3.26×7.9

Technical Advantage

Characteristics of heat-conducting oil boiler1. The seal between the burner interface and the tube plate adopts a labyrinth type, which has good sealing performance and large expansion space, which prolongs the service life of the burner and improves the thermal efficiency.2. The thermic fluid heater adopts two-coil structure, three-pass flue gas, compact design, saving space, adding air preheater, and thermal efficiency up to 92% or more.3. Various operation safety protections make the boiler operation safer and simpler, with high temperature control accuracy (±1ºC) and good combustion effect.4. The automatic control function is adopted to prolong the service life of the equipment while saving human resources.5. Hot Oil Boiler can obtain a higher working temperature under a lower operating pressure, and has the technical characteristics of low pressure and high temperature.6. It has complete operation control and safety monitoring devices, easy to operate, safe and reliable.7. It can realize stable heating and precise temperature adjustment to meet different requirements8. The thermal oil boiler has good thermal insulation, adopts high-efficiency thermal insulation materials and advanced construction technology, and has low heat dissipation loss on the furnace wall

Detailed Photos

Application

Owing to its characteristics of high heating temperature, low working pressure, and energy saving, the oil fired thermal fluid heater could be widely used in a variety of industrial heating process.

1) Textile industry - dyeing machine, drying rooms, high temperature machine, resin setting machine.

2) Food industry - cooking, drying, vegetable oil refining.

3) Chemical industry - oil chemistry, polymer industry, reaction tanks, distillation, concentration.

4) Plastics industry - plastics fired, extruded shape.

5) Rubber industry - hot press, hot extent, extrusion, vulcanization molding, injection, etc.

6) Paper industry - drying, corrugated paper processing, calender, glue roller.

7) Wood industry - hot processing, heat setting.

8) Machinery industry - drying, assembly processing

9) Building materials industry - plasterboard drying, asphalt heating, emulsified asphalt, asphalt concrete, concrete component maintenance, etc.

10)Synthetic fiber industry: polymerization, melting, spinning, extension, dry

FAQ

1.What are the heat-resistance temperature of grate and furnace?

The heat resistance temperature of grate is related to the grate material, the highest temperature could be as high as 1100ºC, and the lower temperature could be 700ºC.The highest heat resistance temperature of furnace could be about 1700ºC~1800ºC.2.What is conduction oil/ hot oil / heat transfer fluid?Conduction oil has a high boiling point, it usually used for the industries that need the temperature of 150~350ºC, to instead of steam. The hot oil has the advantages of high transfer efficiency, fast heat transfer, and good thermal stability.3.What about the delivery?We have shipping agent can choosing the cheapest and fastest delivery. FOB,CIF, C&F or EXW are no problem for us.4.What about the maintenance?I will offer you the timely maintenance way sheet after installation of the boiler mainly parts.
5. What's your main product?Our main product scope:1.Fire tube series Horizontal oil/gas fired boilers (0.5-30T/H, 0.7-21MW)2.Water tube series Horizontal Oil/gas fired boiler (4- 35T/H )3.Vertical fire tube series Vertical Oil/gas fired boiler (0.1-2 T/H, 0.06-0.7MW )4.Large drum chain grate new type water fire tube boilers (1-35T/H, 0.7-29MW)5. Double drum chain grate series water tube biomass boilers (4-35T/H, 1.4-29MW)6. Electric boiler boiler ( 10--50 T/H)7.Oil/Gas fired thermal oil boiler8.Coal fired thermal oil boiler heater